UPS Tuncmatik HI‐TECH Ultra X9 10 kVA DSP LCD / 3P/3P / Online / Without batteries

Product id: 51394

Availability: Sold out

Quick overview from the supplier:

UPS Tuncmatik HI-TECH Ultra X9 10 kVA DSP LCD 3P/3P Online, without batteries http://www.tuncmatik.com/ru/product/overview/hi-tech-ultra-10-kva.html Input Phase : 3 phase 4 wire and ground Nominal voltage : 380/400/415 VAC Voltaj range : 208~478 VAC Frequency range : 45-55Hz de 50Hz/54-66Hz at 60Hz (auto sensing) Current THDi : ≤3% (100% nonlinear load) Bypass voltage range : Max. voltage Power factor : ≥0.99 Output Phase : 3 phase 4 wire and ground Nominal voltage : 380/400/415 VAC, Power factor : 0.9 Voltage regulation : ± 1% Frequency Normal mode : ± 1%, ± 2%, ± 4%, ± 5%, ± 10% of the rated frequency (optional) Frequency Battery mode : (50/60±0.2%) Hz Crest factor : 3/1 THD : ≤2% with linear load, ≤5% with non linear load Efficieny : 93% Battery Voltage : Standart unit.±120Vdc (20pcs 12V7Ah) (2x20pcs 12V9Ah optional) Long run unit Charge current (A) (charge current can be set according to battery capacity installed : Standard unit.1.35A (2.7A optional) Long run unit. Max. current 10A Transfer time : Utility to battery. 0ms; Utility to bypass. 0ms Protection Overload AC mode : Loads ≤110%. last 60min, ≤125%. last 10min, ≤150%. last 1min, >150% change to bypass immediately Overload Battery mode : Loads ≤110%. last 10min, ≤125%. last 1min, ≤150%. >150% shut down UPS immediately Overload Bypass mode : Breaker 20A Short circuit 120 peak : Over temperature Line mode : Switch to bypass, Backup mode Battery low Alarm and switch off : Self-diagnostic Upon power on and software control : EPO (optional) Shut down UPS immediately : Battery Advanced battery management : Noise suppression Complies with EN62040-2 Indicators & Alarm Status LED & LCD : Line mode, Bypass mode, Battery low, Battery bad, Overload & UPS fault LCD panel : Input voltage, Input frequency, Output voltage, Output frequency, Load percentage, Battery voltage & Inner temperature Audible & Visual : Line failure, Battery low, Overload, System fault Management Operating systems : Windows® 98/2000/2003/XP/Vista/2008, Windows¨ 7/8, Linux, MAC Interface : RS 485, USB, Paralel (Optional), Dry contact, Intelligent slot, SNMP adapter (Optional), Relay card (Optional) Dimensions & Weight D x G x Y (mm) : 828 x 250 x 868 Weight(kg) : 115/57

  • Sign up to be notified when it will be in stock